Barcelona, Spain
info@nugar.es
+34 938 33 43 32
MOD: NR-P
Power resistors designed for braking and charging applications from 25 kW to 1.000 kW. With IP20 protection grade and natural cooling, with the possibility of installing forced ventilation.
| Powers | 25kW < 1.000kW |
| Degree of protection | IP20 |
| Tolerance Resistance | ± 5% |
| Terminations | STAINLESS STEEL-316L |
| Resistive Wire | A-1-N1 |
| Local | STAINLESS STEEL-316L |
| Support Resistance | Ceramics |
| Mounting | Horizontal |
| Exits |
| Single-phase |
| Three-phase |
| Custom bridges |
| Protection |
| Thermal protector |
| N Cooling |
| Natural convection |
| Cooling F |
| Forced ventilation |
| Grips |
| Rings |
Discover our entire catalogue of resistors with the most specific details to resolve your doubts and the most valuable information about our products.
Contact us to receive the catalogue in digital and/or physical format.
The power resistors that we manufacture in Nugar Resistor Technology They are intended and designed for both braking and loading applications.
With IP20 protection level and natural cooling, these devices offer the possibility of installing forced ventilation to improve the performance of the electrical system in which they are installed.
Manufactured with high quality inorganic materials, which offer high thermal resistance and silent operation. With a ceramic resistance support, they provide protection and security.
It should also be noted that the NR-P power resistors are prepared to work with powers ranging from 25 kW to 1.000 kW.
We know the relevance that these components have for various factories and companies and this is the reason why we seek to generate efficient and safe devices that perfectly control the flow of electricity to avoid overheating that compromises the system.
The size of the power resistors is a very important aspect, since it is directly related to the requirements of the circuit where they are going to be placed.
At this point, the most important thing to know is that these resistors must be large enough to prevent themselves from overheating.
If the measurement is not correct, it is most likely that each unit of the electrical system will be overloaded and, consequently, overheated. If this happens, the entire circuit may be affected.
Power resistors can be custom made, used for different applications, powers and ohms. Everything in the same module. Contact our technicians to develop the most appropriate power resistance for your needs.
Power resistors are mainly used in applications that require electricity for a different use. They are also usually used to regulate the power of the system in which they are installed and to limit the amount of energy that can pass through digital circuits or small motors.
With the use of power resistors, the aim is to prevent the electrical components of a system from being damaged as a result of possible overheating.
Power resistors have the main objective of dissipating the voltage of the instruments in some electrical circuits that require a smaller amount of energy than others.
Basically, by reducing the amount of current, what they do is protect delicate elements within a system.
It can also be of great help to minimize electrical noise generated by the introduction of energy into a circuit, creating tolerance and stability because it distributes power appropriately.
General
info@nugar.es
Business
comercial@nugar.es
Shopping
compras@nugar.es
Phone
+34 938 33 43 32